Soukkio’s high-quality selection of sandspreading buckets comes in several different sizes and models. The wide sandspreading buckets are mainly designed to ensure the machine’s own progress in slippery conditions.
As standard equipment, the sandspreader includes the necessary adapter and hydraulic quick connectors. With the 3-point attachment, the sanding bucket can be attached to front or rear lifting devices.
The sandspreader buckets have a tight structure and the sanding material cannot fall out during the transfer run. The sanding roller leaves an even and regular sanding mark.
Built-in chain transmission protected behind service hatches. The end bearings of both axles are protected.
- Hydraulic motor driven
- Stepless feeding rate adjustment by flow control valve
- Includes mixing/crushing shaft
- Built-in secure chain transmission
- Hydraulic hoses ½” with the necessary quick connectors
- Includes the necessary adapter for the work machine
- Can be used on front or back of the work machine
- A large feeding roller and an efficient mixing/crushing shaft guarantees a good and evenly patterned sanding track
- Thanks to the upper rubber and the spring-weighted lower rubber, a dense structure; the material to a spread cannot fall off the bucket during transport
- Easy to fill directly from the pile
- Strong construction
- 1 year guarantee
Sand spreaders 1,0 m³-3,0 m³ dimensions
| Volume | Max width | Gritting width |
| 1,0 m³ | 2060 mm | 1755 mm |
| 1,0 m³ width |
2785 mm | 2480 mm |
| 1,6 m³ | 2260 mm | 1955 mm |
| 2,0 m³ | 2460 mm | 2155 mm |
| 2,0 m³ width | 2785 mm | 2480 mm |
| 3,0 m³ | 2785 mm | 2480 mm |
